[AlaskaRC] Help

[Steven Lingle]

just make sure no one else is flying on that channel.  Don't want to lose two planes.

Steven Lingle
barisax at olypen.com



On Sep 4, 2011, at 2:08 PM, M M wrote:

> I did get the receiver and will give to George so he can crash another plane.   Mike Mosesian
>  
> 
> From: "Flyrc907 at aol.com" <Flyrc907 at aol.com>
> To: alaskarc at lists.alaskarc.org
> Sent: Sunday, September 4, 2011 11:25 AM
> Subject: Re: [AlaskaRC] Help
> 
> Mike:Thanks a lop.  George
>  
> In a message dated 9/3/2011 11:01:43 A.M. Alaskan Daylight Time, whipper at ptialaska.net writes:
> George,
>  
> I just dropped off the receiver at bells.  I didnt get to see Mike M to tell him what it was about, so you might have to remind him about it. It is with the cashier at the moment so if he doesnt know about it thats where it is at.
>  
> Mike A
>  
> ----- Original Message -----
> From: Flyrc907 at aol.com
> To: alaskarc at lists.alaskarc.org
> Sent: Thursday, September 01, 2011 11:27 AM
> Subject: Re: [AlaskaRC] Help
> 
> Mike:  Thanks.  Let's see if I can find a pcm transmitter.  Where do you live??  George
>  
> In a message dated 8/31/2011 6:00:37 P.M. Alaskan Daylight Time, whipper at ptialaska.net writes:
> George,
>  
> I looked threw my box of "crap" and found a 9 channel Synthesized PCM receiver. Its a R319 dps. This means it will work on any channel you set it too, but the radio needs to be PCM capable. If the radio is capable you are more then welcome to it.
>  
> Mike A
>  
> ----- Original Message -----
> From: Flyrc907 at aol.com
> To: alaskarc at lists.alaskarc.org
> Sent: Wednesday, August 31, 2011 9:50 AM
> Subject: [AlaskaRC] Help
> 
> All:  I used to be active in the club a few years ago and need a little help.  I have a 12 year old neighbor who is extremely interested in the hobby, so I gave him and old airplane I had, complete except for a transmitter and receiver.  He is aching to fly it, but he needs  a transmitter and receiver, any four channel will do.  If the batteries are bad, I can take care of that.  The airplane has Hitec servos in it with Futaba plugs, so if anyone has what I need laying around, I could put it to good use.  337-2073.  George Gallagher
>  
>  
> _______________________________________________
> AlaskaRC mailing list
> AlaskaRC at lists.alaskarc.org
> http://lists.alaskarc.org/mailman/listinfo/alaskarc
> 
> 
> _______________________________________________
> AlaskaRC mailing list
> AlaskaRC at lists.alaskarc.org
> http://lists.alaskarc.org/mailman/listinfo/alaskarc
> _______________________________________________
> AlaskaRC mailing list
> AlaskaRC at lists.alaskarc.org
> http://lists.alaskarc.org/mailman/listinfo/alaskarc
> 
> 
> _______________________________________________
> AlaskaRC mailing list
> AlaskaRC at lists.alaskarc.org
> http://lists.alaskarc.org/mailman/listinfo/alaskarc
> 
> _______________________________________________
> AlaskaRC mailing list
> AlaskaRC at lists.alaskarc.org
> http://lists.alaskarc.org/mailman/listinfo/alaskarc
> 
> 
> _______________________________________________
> AlaskaRC mailing list
> AlaskaRC at lists.alaskarc.org
> http://lists.alaskarc.org/mailman/listinfo/alaskarc

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alaskarc.org/pipermail/alaskarc/attachments/20110905/70fb8236/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: images.jpeg
Type: image/jpeg
Size: 3329 bytes
Desc: not available
URL: <http://lists.alaskarc.org/pipermail/alaskarc/attachments/20110905/70fb8236/attachment.jpeg>