[AlaskaRC] Click CG
Jeff Anderson
anderson.rdjeff at gmail.com
Thu Jan 10 14:42:12 AKST 2013
Thanks guys! I should be ready for Sunday!
Sent from my iPhone
On Jan 10, 2013, at 1:19 PM, Armand Marshall <Armand at nmitsolutions.com> wrote:
>
> From: robert STEPHENS [mailto:bobfstephens at yahoo.com]
> Sent: Thursday, January 10, 2013 1:01 PM
> To: Armand Marshall
> Subject: Re: [AlaskaRC] Click CG
>
> Jeff,
>
> My Clik works best balanced between 7 1/2 and 7 3/4 inches back from the nose of the plane (measured from where the Depron fuse and motor mounting meets).
>
> The instructions for the plane is somewhat vague on this point. They said to; "balance the plane just forward of the antitorsion strip (?)" and; " to place the battery on the left side, but each plane is different". The Czechs are funny guys.
>
> As a practical matter, these flat foamies seem to be not too critical in the cg placement.
>
> Will bring mine tonight for experiments (at Teeland)!
>
>
>
> -----Original Message-----
> From: alaskarc-bounces at lists.alaskarc.org [mailto:alaskarc-bounces at lists.alaskarc.org] On Behalf Of Jeff Anderson
> Sent: Wednesday, January 09, 2013 9:37 PM
> To: alaskarc at lists.alaskarc.org
> Subject: [AlaskaRC] Click CG
>
> Hi all,
>
> I built a Click from patterns that Bob lent me, and I missed out on locating the CG. Does anybody have that info?
>
> Thanks!
>
> Jeff
>
> Sent from my iPhone
> _______________________________________________
> AlaskaRC mailing list
> AlaskaRC at lists.alaskarc.org
> http://lists.alaskarc.org/mailman/listinfo/alaskarc
>
>
> _______________________________________________
> AlaskaRC mailing list
> AlaskaRC at lists.alaskarc.org
> http://lists.alaskarc.org/mailman/listinfo/alaskarc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alaskarc.org/pipermail/alaskarc/attachments/20130110/14b0cfe3/attachment.html>
More information about the AlaskaRC
mailing list